Via Priority mail to most locations, with confirm.  You may add insurance if you wish.

You asked, I had this piece made! 45 YEARS in the engine rebuilding industry means I know valves. Redesigned head, undercut REDUCED to .303", and flow tested. BIG 1.89" intake and 1.59" exhaust! .550" tippet length, this gives room for those rail style rocker arms, even lash caps if you need them.

These are EPN? performance valves, simply the best!

enginepartsnetwork.com tells my company story.

Made for us by the very same company that supplies the two "big boy" suppliers, part numbers are 11792EPN & 11793EPN, marked right on the stem of each piece!!

Don't let the low price fool you, I own the company, there are no fancy catalogs or millions spent on National advertising, there is just US and this EXCEPTIONAL product which we are quite PROUD of!!

If you look at these and can't just say "WOW!!" then send them back for a full refund.

For use with anything from normal street use to FULL competition, or just a warm fuzzy feeling in your nice hot street supercharged or turbocharged 2300cc FORD 4 cylinder OHC engine.

Application is the OHC cast Iron head 2.3L, all years using the 11/32nds stem size, and many aftermarket replacement heads such as Esslinger using this valve size.

LOCKS ARE included to help make your life easy, 7° and hardened to fit the early style single slot stock retainers or any 7° aftermarket retainer.

Reinforced at the margin to stop tuliping, with a FULL .303" undercut for maximum airflow.

THESE ARE THE REAL DEAL!, my word on that! These were tested and passed to 1400° which equal and exceed some maker's Severe Service specs.

Fully CNC machined to a fine polish, consistant margins, FULL swirl undercut and back blended after the hard chrome plating is applied to the stems. These ARE plated, not flash sprayed. A heavy 55Rc wafer tippet, and heat treated ground keeper groove keeps the strength high.  SAE EV8 grade stainless steel one piece forged!

This part is a dropin fit 11/32nds stem diameter, stock length at 4.800", and require seat enlargement on many heads to fit. The tippet length is .550" to allow room for lash caps if you are running the reduced base circle camshaft.

S/H to the USA lower 48 will add just $10.00, we WILL ship worldwide.

Paypal is fine, or just call weekdays to 503-257-7947 with any questions..