|
Vehicle Description
|
|
You are bidding on a very fast 2003 Yamaha R1 that has had extensive modifications done to almost every part of the bike. It has almost $50,000.00 invested in it. I bought the bike new and did most of the work in my fabrication shop. The engine is sleeved and bored 3mm by millenium technologies. The crank is stroked 6mm by APE. The cams have been reground to run on nitrous by Web Cams. The head is ported and poilished with oversized Ferrea valves. It has a NX full wet nitrous system with a purge solenoid, schnitz progressive vitrous controller, schnitz EFIR solenoid ignition retard module, Power Commander USB, Barnett 6 spring pressure plate, Falicon Billet clutch basket, Falicon knife rods, Brocks side winder exhaust with a Murry open megaphone, adjustable cam sprockets. The forks are internally lowered and resprung and revalved by GMD Computrack. The rear shock is also resprung and re valved to work with the 10 inch over swing arm. Almost every thing is either chromed, polished anodized, or powder coated. The engine only has 200 miles on it since it was built. It only had 400 mile when I got the motor to build. The only imperfections on the bike are the lower fairings are scraped up due to the bike being lowered 5 inches. Please call me with any questions and I will answer them to the best of my knowledge. If you bid on the bike and win, and you see the bike and it is not what you want, I will refund your deposit minus my listing fee of $100.00, but once you pay for it, it is yours so please ask any question or concern. Please call Scott at (954) 632-6224.
|
|
